Shotgun Gunsmithing
Please note that the prices listed below are estimates. Actual rates may vary depending on complexity of the job. There may be times when a specialist may be required to perform a particular job, so shipping charges may apply.
| TYPE | SHOTGUN SERVICES | RETAIL MIN. | RETAIL MAX. |
|---|---|---|---|
| Accuracy | Sight in slug gun | $40 | $40 |
| Barrel Work | Pin or install screw on slug barrels | $40 | $40 |
| Barrel Work | Cut crown & reinstall bead | $65 | $65 |
| Barrel Work | Cut crown & reinstall bead on double barrels | $80 | $80 |
| Barrel Work | Drill & tap mid bead on shotgun | $30 | $30 |
| Barrel Work | Reinstall (solder) barrel hanger - finish not included | $100 | $100 |
| Barrel Work | Raise dent in barrel (price per dent) | $40 | $40 |
| Barrel Work | Raise dent in rib (price per dent) | $40 | $40 |
| Choke | Install Tru-Choke style tubes on 10, 12, and 20 ga | $100 | $100 |
| Choke | Ream & hone barrel for more open choke | $100 | $100 |
| Chamber | Rechamber to 3" chamber | $80 | $80 |
| Chamber | Convert 2-9/16" chamber to 2 3/4" on Browning autos | $250 | $250 |
| Chamber | Convert 2-9/16" chamber to 2 3/4" on Winchester Model 12 | $200 | $200 |
| Customization | Cowboy action job on double barrel (includes trigger enhancement and brake) | $200 | $200 |
| Remington | Change safety to Left Hand on Remington Shotguns (other guns-POR) | $60 | $60 |
| Remington | drill, tap, and mount scope on 870 | $100 | $100 |
| Remington | Drill, tap, and mount scope on Remington 1100, 11-87 | $150 | $150 |
| Remington | Drill & Tap only on Remington 870 | $80 | $80 |
| Remington | Drill & Tap only on Remington 1100 and 11-87 | $100 | $100 |
| Remington | Resolder the magazine tube in Rem 1100 or 11-87, includes finishing | $180 | $180 |
| Remington | Solder barrel seat on 1100 or 11-87 | $100 | $100 |
| Remington | resolder barrel locater-includes refinish 1100 or 11-87 | $100 | $100 |
| Remington | install Rem 870 ejector spring | $60 | $60 |
| Remington | install Rem 870 ejector housing and spring (doesn’t include refinish & test fire ammo) | $100 | $150 |